Difference between revisions of "C and assembly development introduction"

From Hackspire
Jump to navigation Jump to search
(Setting up a development environment)
Line 2: Line 2:
  
 
==Setting up a development environment==
 
==Setting up a development environment==
===Option 1 : Get the Ndless SDK Docker image===
+
===Option 1 : Building and installing the toolchain and the SDK===
[https://www.docker.com/ Docker] is a platform to build and share applications through lightweight containers. The Ndless SDK Docker image packs the Ndless SDK and all its dependencies. This is the easiest and quickest method to get a fully functional development environment.
 
 
 
To install the Ndless SDK Docker image [https://registry.hub.docker.com/u/ndless/ndless-sdk/ follow the instructions on hub.docker.com].
 
If you don't have Docker, don't know much of Docker or prefer to use a standard installation, skip to Option 2.
 
 
 
===Option 2 : Building and installing the toolchain and the SDK===
 
 
*'''Get the latest [http://www.unsads.com/projects/nsptools/downloader/download/release/5 Ndless SDK build]''' for C, C++ and assembly development on TI-Nspire.
 
*'''Get the latest [http://www.unsads.com/projects/nsptools/downloader/download/release/5 Ndless SDK build]''' for C, C++ and assembly development on TI-Nspire.
 
:You may also prefer to use the freshest in-development version of the Ndless SDK from [https://github.com/ndless-nspire/Ndless GitHub]. Just git-clone it:
 
:You may also prefer to use the freshest in-development version of the Ndless SDK from [https://github.com/ndless-nspire/Ndless GitHub]. Just git-clone it:
Line 22: Line 16:
 
* '''Build the SDK''', only if you are using the GitHub's clone version of the SDK:
 
* '''Build the SDK''', only if you are using the GitHub's clone version of the SDK:
 
  make
 
  make
 +
 +
===Option 2 : Get the Ndless SDK Docker image===
 +
'''Warning: This option is very outdated and it is strongly recommended to use Option 1 and build the SDK yourself!'''
 +
 +
[https://www.docker.com/ Docker] is a platform to build and share applications through lightweight containers. The Ndless SDK Docker image packs the Ndless SDK and all its dependencies. This is the easiest and quickest method to get a fully functional development environment.
 +
 +
To install the Ndless SDK Docker image [https://registry.hub.docker.com/u/ndless/ndless-sdk/ follow the instructions on hub.docker.com].
  
 
===Verifying the installation===
 
===Verifying the installation===

Revision as of 18:09, 2 August 2015

This tutorial describes how to set up an environment and use the Ndless SDK to write native Ndless-compatible programs for the TI-Nspire.

Setting up a development environment

Option 1 : Building and installing the toolchain and the SDK

  • Get the latest Ndless SDK build for C, C++ and assembly development on TI-Nspire.
You may also prefer to use the freshest in-development version of the Ndless SDK from GitHub. Just git-clone it:
git clone git://github.com/ndless-nspire/Ndless.git
  • Make sure your system has the following dependencies: GCC (with c++ support), binutils, GMP (libgmp-dev), MPFR (libmpfr-dev), MPC (libmpc-dev), boost-program-options, wget. Install them with your system's package manager if not.
  • Run the SDK's build_toolchain.sh script that will download and build a complete ARM toolchain compatible with Ndless, and install it <(edit the PREFIX variable at the beginning of the script to change the install location). You don't need to be root for this.
cd ndless-sdk/toolchain/
./build_toolchain.sh

Running the script again will continue from the last successful step (not redownloading everything for instance). At the end of a successful build you should see Done!. Alternatively you can verify the build using echo $?. 0 indicates success.

  • Now add the following folders to your PATH environment variable. ~/.bash_profile should be a good place for this, just add something like this to it:
export PATH="[path_to_ndless]/ndless-sdk/toolchain/install/bin:[path_to_ndless]/ndless-sdk/bin:${PATH}"
  • Build the SDK, only if you are using the GitHub's clone version of the SDK:
make

Option 2 : Get the Ndless SDK Docker image

Warning: This option is very outdated and it is strongly recommended to use Option 1 and build the SDK yourself!

Docker is a platform to build and share applications through lightweight containers. The Ndless SDK Docker image packs the Ndless SDK and all its dependencies. This is the easiest and quickest method to get a fully functional development environment.

To install the Ndless SDK Docker image follow the instructions on hub.docker.com.

Verifying the installation

  • Open a console, and run:
$ nspire-gcc

If everything has been set up correctly you should see something similar to:

arm-none-eabi-gcc: fatal error: no input files
compilation terminated.

5-minute tutorial

As a convention for the next chapters, lines starting with $ are commands you should type in a console. Other lines are the command's output.

Your first build

Ndless comes with sample programs in the samples/ directory of the Ndless SDK. We will try to build the C Hello World. Change the current directory of the console:

$ cd "<my_ndless_sdk_copy>/ndless-sdk/samples/helloworld-sdl"

Ndless programs are built with GNU Make, which is run with the command make. So let's make the program:

$ make
nspire-gcc -Wall -W -marm -Os -c hello-sdl.c
mkdir -p .
nspire-ld hello-sdl.o -o ./helloworld-sdl.elf 
genzehn --input ./helloworld-sdl.elf --output ./helloworld-sdl.tns --name "helloworld-sdl"
make-prg ./helloworld-sdl.tns ./helloworld-sdl.prg.tns

nspire-gcc is Ndless's wrapper for the GNU C Compiler GCC, which compiles C and assembly source files to object files (here hello.o).

nspire-ld is the wrapper for GCC, which redirects gcc with the option "-fuse-ld=gold" to use another wrapper "arm-none-eabi-ld.gold" as linker. "arm-none-eabi-ld.gold" adds some necessary libraries to the final program.

genzehn converts the executable created by "nspire-ld" to a format, which ndless supports.

make-prg adds a simple loader on top so the executable works on older versions of ndless.

Your first program

If you want to create a program from scratch:

  • Create a new directory for the program
  • Type in a console:
cd "<your directory path>"
nspire-tools new <program>
where <program> is your program name. This will create a Makefile to build <program>.tns
  • Create a new .c file and edit your program
  • Run the make command to build it