This document describes the format for clock speed load values. The clock speed can be set by writing to the first two registers at Memory-mapped_I/O_ports#900B0000_-_Power_management. Clock speeds are in units of MHz. Most of this information is derived from Nover and nspire_emu source code.
CX model
| Bit |
0 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
.. |
30 |
31
|
|
|
Base/CPU value |
48MHz base |
|
CPU/AHB value |
Base value |
|
Unknown
|
| Base to CPU ratio (if 48MHz base) |
1 << (Unknown)
|
| CPU to AHB ratio (if 48MHz base) |
2
|
| Base clock speed (if 48MHz base) |
48
|
| Base to CPU ratio |
(Base/CPU value)*2 or 2 if 0
|
| CPU to AHB ratio |
(CPU/AHB value) + 1
|
| Base clock speed |
6 * (Base value)
|
| CPU clock speed |
(Base clock speed) / (Base to CPU ratio)
|
| AHB clock speed |
(CPU clock speed) / (CPU to AHB ratio)
|
| APB clock speed |
(AHB clock speed) / 2
|
The unknown quantity only ever seems to be either 1 or 2. It's probably a multiplier.
Classic model
| Bit |
0 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20
|
|
|
Base/CPU value |
27MHz base |
|
CPU/AHB value |
|
Base value
|
| Base to CPU ratio |
(Base/CPU value) * 2
|
| CPU to AHB ratio |
(CPU/AHB value) + 1
|
| Base clock speed (if 27MHz base) |
27
|
| Base clock speed |
300 - 6 * (Base value)
|
| CPU clock speed |
(Base clock speed) / (Base to CPU ratio)
|
| AHB clock speed |
(CPU clock speed) / (CPU to AHB ratio)
|
| APB clock speed |
(AHB clock speed) / 2
|