Hardware: Difference between revisions

From Hackspire
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
The chips are the same on the TI-Nspire and the TI-Nspire CAS.
==Hardware revisions==
 
===TI-Nspire (Clickpad) / Phoenix ===
<div style="overflow-x: auto">
{| class="wikitable" style="font-size: 0.8em"
! Variant / HW Revision !! Factory !! Datestamps !! MB code (PCB ID) !! board # !! LCD board code !! board # !! KB board code !! board # !! Other board !! board # !! Source (URL) !! Comment. (Note: many datestamps come from forums and other compilations) !!
| PVT CAS+ ||  ||  ||  ||  || PH1_PVT_LCDB || 2430 ||  ||  ||  ||  || http://i.imgur.com/4hVUkaa.jpg ||  ||
| <none> / pre-A || S || 0407-0707 || P2/P3 ASIC MB_MP || 6440 || P1R2/P3_LB_MP || 2440 ||  ||  ||  ||  || http://i.imgur.com/WGPf0LF.jpg || Some hav
utf-8
<center>Proud owner of a TI-83+, TI-84+SE, and TI-Nspire clickpad edition.
</center>utf-8
e an 'A' suffix to the left serial part: https://i.imgur.com/77oy8JT.jpg , https://i.imgur.com/K0aqUuW.jpg ; Also reported here: https://tiplanet.org/forum/viewtopic.php?f=17&t=4995 || Ph3-EVT1_FPC_1413
| A || S || 0707-0907? ||  ||  ||  ||  ||  ||  ||  ||  ||  || http://www.publicsurplus.com/sms/auction/view?auc=1171896 for the associated viewscreen. (0607A would be seen for CAS devices) ||
| A (other?) || K || 0509 ||  ||  ||  ||  ||  ||  ||  ||  ||  || http://i.ebayimg.com/images/g/j6kAAOSwgn5XEZ-a/s-l1600.jpg ||
| B || S || 1207? ||  ||  ||  ||  ||  ||  ||  ||  ||  || https://groups.google.com/forum/#!msg/tinspire/wwFr1zlFf0s/G2ePaXVXwOkJ ||
| C || P || 0108-0308? ||  ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
| D || P || 0508 ||  ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
| E || P || 0508-0708 ||  ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
| F || P || 0708-0908? ||  ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
| G || P || 0409-0809 ||  ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
| H || P || 0609 ||  ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
| I || P || 0809?-1209 ||  ||  || N1/N3_LB_ ||  ||  ||  ||  ||  || http://i.imgur.com/RidWq1Z.jpg ||  ||
</div>
===TI-Nspire (Touchpad) / Phoenix (Nspire2.0)===
<div style="overflow-x: auto">
{| class="wikitable" style="font-size: 0.8em"
! Variant / HW Revision !! Factory !! Datestamps !! MB code (PCB ID) !! board # !! LCD board code !! board # !! KB board code !! board # !! Other board !! board # !! Source (URL) !! Comment. (Note: many datestamps come from forums and other compilations)
| PROTO CAS ||  ||  || PCB TG2995C MB || 4400 ||  ||  ||  ||  ||  ||  || https://tiplanet.org/forum/viewtopic.php?t=14207 ||
|  DVT CAS ||  ||  || N1 MB NKB || 4420 || N1/N3 LB PCR2 FPC || 2410 ||  ||  ||  ||  || https://tiplanet.org/forum/viewtopic.php?t=10964 ||
| A || P || 0110-0310 || PCB TG2995D MB || 4430 || TG2995 C LB || 2410 ||  ||  ||  ||  || http://datamath.org/Graphing/JPEG_NSpire_CAS_TP.htm || What is https://i.imgur.com/04R7lYv.jpg ?
| B || P || 0310-0710 || PCB TG2995D MB || 4430 || TG2995 C LB || 2410 ||  ||  ||  ||  || http://datamath.org/Graphing/JPEG_NSpire_TP_Y.htm || Found on a school edition (yellow)
| C || P || 0710-1010 ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
| D || P || 0611-0711 ||  ||  ||  ||  ||  ||  ||  ||  ||  || https://i.imgur.com/znF0jP3.jpg shows a datestamp
| E || P || 0412 ||  ||  ||  ||  ||  ||  ||  ||  ||  || https://i.imgur.com/73G6iBH.jpg shows a datestamp
</div>
===TI-Nspire CX / Firebird===
<div style="overflow-x: auto">
{| class="wikitable" style="font-size: 0.8em"
! Variant / HW Revision !! Factory !! Datestamps !! MB code (PCB ID) !! board # !! LCD board code !! board # !! KB board code !! board # !! Other board !! board # !! Source (URL) !! Comment. (Note: many datestamps come from forums and other compilations)
| Proto ("Nspire Color") ||  || 0810 || Firebird Color MB || 6412 ||  ||  || none ||  || Firebird Color BTB EVT || 2410 || https://tiplanet.org/forum/gallery/image_page.php?image_id=1691 ||
| <none> / pre-A ||  ||  || Firebird Color MB || 6421 ||  ||  ||  ||  ||  ||  || https://i.imgur.com/Y4yds6M.png ||
| A || P || 0211?-0411 || Firebird Color MB || 6422 ||  ||  || Firebird (Noncas) Color KB EVT || 4421 || Firebird Color BTB EVT1.2 || 2412 || https://tiplanet.org/forum/gallery/image_page.php?image_id=1229 ||
| B || P || 0411-0511 || Firebird Color MB || 6422 ||  ||  || Firebird (Noncas) Color KB EVT || 4421 || Firebird Color BTB EVT1.2 || 2412 || https://tiplanet.org/forum/gallery/image_page.php?image_id=2634 ||
| C || P || 0511-0811? || Firebird Color MB || 6422 ||  ||  || Firebird (Noncas) Color KB EVT || 4421 || Firebird Color BTB EVT1.2 || 2412 || https://tiplanet.org/forum/gallery/image_page.php?image_id=1227 ||
| D || P || 0911-0512 || Firebird Color MB || 6422 ||  ||  || Firebird (Noncas) Color KB EVT || 4421 || Firebird Color BTB EVT1.2 || 2412 || https://tiplanet.org/forum/gallery/image_page.php?image_id=2397 || https://i.imgur.com/OtnD7S3.jpg shows a datestamp. https://i.imgur.com/XEqIPUf.jpg is a CX-C CAS.
| E || P || 0512-0612? ||  ||  ||  ||  ||  ||  ||  ||  ||  || https://i.imgur.com/O3hLcQT.jpg shows a datestamp
| F || P || 0712-0812? || Firebird Color MB || 6430 ||  ||  || Firebird (Noncas) Color KB EVT || 4421 || Firebird Color BTB EVT1.2 || 2412 || https://tiplanet.org/forum/gallery/image_page.php?image_id=2398 ||
| G || P || 1012? ||  ||  ||  ||  ||  ||  ||  ||  ||  || https://i.imgur.com/SNfyWQP.jpg shows a datestamp
| H || P || 1112-0213 ||  ||  ||  ||  ||  ||  ||  ||  ||  || https://i.imgur.com/yOmZY29.jpg shows a datestamp
| I || P || 0213 ||  ||  ||  ||  ||  ||  ||  ||  ||  || Mention of the datestamp: https://www.omnimaga.org/general-calculator-help/hardware-needed-to-downgrade-3-2-4/msg360687/#msg360687
| J ("CR") || P || 0313-0513? || NSC CR MB || 4440 ||  ||  || Firebird (non)cas Color KB DVT || 4424 || Firebird Color BTB EVT1.2 || 2412 || https://tiplanet.org/forum/gallery/image_page.php?album_id=184&image_id=2878 || incompatible with OS versions < 3.2.3 / Nlaunch + J04 connector removed
| K || P || 0613-0713? ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
| L || P || 1113?-1213 ||  ||  ||  ||  ||  ||  ||  ||  ||  || Datestamp from here: https://tiplanet.org/forum/viewtopic.php?p=170487#p170487
| M || P || 1213-0114? ||  ||  ||  ||  ||  ||  ||  ||  ||  || Datestamp from here: https://tiplanet.org/forum/viewtopic.php?p=166933#p166933
| N || P || 0314 || NSC SM MB || 4412 ||  ||  || Firebird (non)cas Color KB DVT || 4424 || Firebird Color BTB EVT1.2 || 2412 || https://tiplanet.org/forum/gallery/image_page.php?image_id=3697 ||
| O ("CR II") || P || 0414-0614 || NSC SM MB || 4412 ||  ||  || NSC CELL (Non)CAS KB || 4410 || Firebird Color BTB || 2440 || https://tiplanet.org/forum/gallery/image_page.php?image_id=5469 || Samsung rechargeable battery. (Ref calc for France: N3/TBL/1E2/K)
| P || P || 0614 || NSC SM MB || 4412 ||  ||  || NSC CELL (Non)CAS KB || 4410 || Firebird Color BTB || 2440 ||  ||
| Q ? ||  ||  ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
| R || P || 0814? ||  ||  ||  ||  ||  ||  ||  ||  ||  || Datestamp from http://www.cncalc.org/thread-11903-1-1.html
| S || P || 0914-1014 ||  ||  ||  ||  ||  ||  ||  ||  ||  || https://i.imgur.com/zsYyaNC.jpg shows a datestamp
| T ("CR III") || P || 1014-1214? || CX CRIII MB || 4412 ||  ||  || NSC CR OS (Non)CAS || 4413 || Firebird Color BTB || 2440 || https://tiplanet.org/forum/gallery/image_page.php?image_id=5472 || incompatible with OS versions < 3.9.1
| U || P || 0115? ||  ||  ||  ||  ||  ||  ||  ||  ||  ||
| V || P || 0315-0815? || CX CRIII MB || 4412 ||  ||  || NSC CR OS (Non)CAS || 4413 || Firebird Color BTB || 2440 ||  ||
| W ("CR IV") || P || 1115-0116 || CX CR IV MB || 4440 ||  ||  || <none> ||  || <none> ||  || https://tiplanet.org/forum/gallery/image_page.php?album_id=184&image_id=6823 || Now uses a unified motherboard, instead of 3 parts. New LCD + J04 connector back + incompatible versions < 4.0.1
</div>
===TI-Nspire CM / Rabbit===
<div style="overflow-x: auto">
{| class="wikitable" style="font-size: 0.8em"
! Variant / HW Revision !! Factory !! Datestamps !! MB code (PCB ID) !! board # !! LCD board code !! board # !! KB board code !! board # !! Other board !! board # !! Source (URL) !! Comment. (Note: many datestamps come from forums and other compilations)
| Chinese Language EVT1 ||  || <none> || RABBIT MB EVT || 4410 ||  ||  || RABBIT KB (NON ) CAS EVT || 2416 ||  ||  || https://tiplanet.org/forum/gallery/image_page.php?image_id=2658 ||
| CM-C EVT1 ||  || (103) ||  ||  ||  ||  || RABBIT KB (NON) CAS EVT || 2419 ||  ||  || https://tiplanet.org/forum/gallery/image_page.php?album_id=193&image_id=2761 ||
| CM-C CAS DVT1 ||  || (240) || RABBIT MB EVT || 4415 ||  ||  || RABBIT KB (NON) CAS EVT || 4411 ||  ||  || https://tiplanet.org/forum/gallery/image_page.php?album_id=1&image_id=6294 ||
| CM-C || P || 0911 || RABBIT MB DVT || 6420 ||  ||  || RABBIT KB (NON) CAS EVT || 4420 ||  ||  || https://tiplanet.org/forum/gallery/image_page.php?album_id=119&image_id=1359 ||
| CM-C (CAS) No-rev -> A || P || 0412-0512 || RABBIT MB DVT || 6420 ||  ||  || RABBIT KB (NON) CAS EVT || 4411 ||  ||  || https://tiplanet.org/forum/gallery/image_page.php?album_id=180&image_id=2596 || https://i.imgur.com/J3cJBcI.jpg shows a 0512 datestamp
</div>
==PCB==
==PCB==
Here are some hi-res PCB images, provided by bloo: [http://hackspire.unsads.com/~squalyl/nspire/pics/nspire001.jpg], [http://hackspire.unsads.com//~squalyl/nspire/pics/nspire002.jpg], [http://hackspire.unsads.com//~squalyl/nspire/pics/nspire003.jpg]
High resolution photos can be found in the above table.
 
===Connector J04===
===Connector J04===
As can be seen on the above image, there are empty pads for a connector labelled "J04". Maybe, there are signals to get a little bit further into the calculator.
As can be seen in the PCB photos, there are empty pads for a connector labelled "J04" (not on some CR models). Most likely this is for debugging using an interface such as JTAG.
 
Analyzation of the signals on the pins provided the following information regarding signal types.
I've analyzed the signals on the pins and found out a little about the types of signals.
 
"GND" means signal ground, it has the same potential as the whole ground plane on the PCBs. The minus pole of one battery is directly connected to it.
"GND" means signal ground, it has the same potential as the whole ground plane on the PCBs. The minus pole of one battery is directly connected to it.
"Vcc 3.3V" means the 3.3V power supply of the calculator. It seems to be present even if the calculator is off.
"Vcc 3.3V" means the 3.3V power supply of the calculator. It seems to be present even if the calculator is off.
"Floating" is a signal with an undefined voltage level, this state is very likely for inputs.
"Floating" is a signal with an undefined voltage level, this state is very likely for inputs.
"High" is a signal with almost 3.3V, but not a supply signal. These signals are probably inputs with pull-up resistors (they can be pulled-down with a large value resistor).
"High" is a signal with almost 3.3V, but not a supply signal. These signals are probably inputs with pull-up resistors (they can be pulled-down with a large value resistor).
 
{| class="wikitable"
{| border=1
| GND
| GND
| 1
| 2
| GND
| GND
|-
| Vcc 3.3V
| Vcc 3.3V
| 3
| 4
| Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off
| Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off
|-
| High
| High
| 5
| 6
| Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off
| Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off
|-
| High
| High
| 7
| 8
| Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off
| Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off
|-
| Floating
| Floating
| 9
| 10
| 10
| Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off
| Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off
|-
| GND
| GND
| 11
| 11
| 12
| 12
| Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off
| Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off
|-
| GND
| GND
| 13
| 13
| 14
| 14
| GND
| GND
|-
| Floating
| Floating
| 15
| 15
| 16
| 16
| Floating
| Floating
|-
| Floating
| Floating
| 17
| 17
| 18
| 18
| GND
| GND
|-
| Floating
| Floating
| 19
| 19
| 20
| 20
| Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off
| Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off
|-
| Floating
| Floating
| 21
| 21
| 22
| 22
| Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off
| Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off
|-
| Floating
| Floating
| 23
| 23
| 24
| 24
| RS232 Output (115'200,8,n,1)
| RS232 Output (115'200,8,n,1)
|-
| Floating
| Floating
| 25
| 25
| 26
| 26
| RS232 Input
| RS232 Input
|-
| GND
| GND
| 27
| 27
| 28
| 28
| GND
| GND
|-
| GND
| GND
| 29
| 29
| 30
| 30
| GND
| GND
|}
'''TODO:''' Double-check the results and find out, what these signals (Floating, High, Square-wave) really are. Maybe, there are common interfaces as JTAG, I2C or whatever.
'''TODO:''' Double-check the results and find out, what these signals (Floating, High, Square-wave) really are. Maybe, there are common interfaces as JTAG, I2C or whatever.
 
===Connector J01 - Dock connector===
===RS232===
Pins currently known, probably there are more GPIOs accessible. Somewhere there's SPI, too.
A serial (RS232) adapter can be connected from a computer to the following pins of the dock connector (pin 1 is the one at the left-hand side, TI-Nspire upside down, connector at the bottom):
{| class="wikitable"
*Vcc : pin 2
| Vcc || pin 2
*Rx : pin 3
| Rx || pin 3
*Tx : pin 4
| Tx || pin 4
*GND : pin 5
| GND || pin 5 (long)
 
| GPIO4 / USB Data+ with Navigator Cradle || pin 6
The schematic of the circuit can be similar to this one: http://wiki.gp2x.org/wiki/Serial_cable
| USB Data- with Navigator Cradle || pin 7
 
| Vin || pin 8 (medium)
| GPIO0 || pin 17
| GPIO22 || pin 18
| Vin || pin 19 (medium)
| GND || pin 22 (long)
===UART===
A serial adapter can be connected to the Tx/Rx/GND pins of the dock connector (pin 1 is the one at the left-hand side, TI-Nspire upside down, connector at the bottom). '''Warning: only use TTL voltage levels, never RS232 levels'''.
The configuration of the terminal on the computer side should be:
The configuration of the terminal on the computer side should be:
*Baud rate = 115200
{| class="wikitable"
*Data = 8 bit
| Baud rate || 115200
*Parity = none
| Data || 8 bit
*Stop = 1 bit
| Parity || none
*Flow control = none
| Stop || 1 bit
 
| Flow control || none
While starting up, the calculator sends some logging information through the interface. A log (including deletion and reprogramming the OS) can be found [http://hackspire.unsads.com/files/log-philippburch-serial-boot.txt here]).
While starting up, the calculator sends some logging information through the interface. A log (including deletion and reprogramming the OS) can be found [http://hackspire.unsads.com/files/log-philippburch-serial-boot.txt here]).
Different types of files can be send with the X-Modem protocol, depending on the boot startup options chosen with the [[Operating_System#Startup_key_combinaisons|key combos]]. Windows HyperTerminal or TeraTerm strangely couldn't be used for the X-Modem transfer. [http://www.ohse.de/uwe/software/lrzsz.html lrzsz] is a better alternative, which can be built on Windows with Cygwin.
Different types of files can be send with the X-Modem protocol, depending on the boot startup options chosen with the [[Operating_System#Startup_key_combinaisons|key combos]]. Windows HyperTerminal or TeraTerm strangely couldn't be used for the X-Modem transfer. [http://www.ohse.de/uwe/software/lrzsz.html lrzsz] is a better alternative, which can be built on Windows with Cygwin.
  stty -F /dev/ttyS0 115200 -evenp -cstopb
  stty -F /dev/ttyS0 115200 -evenp -cstopb
Line 117: Line 165:
  # The `cat` is used to show the startup logs during reboot
  # The `cat` is used to show the startup logs during reboot
  ./lsz -X boot2.img <> /dev/ttyS0 >&0; cat /dev/ttyS0
  ./lsz -X boot2.img <> /dev/ttyS0 >&0; cat /dev/ttyS0
===Connector J01 - Dock connector===
Pins currently known, probably there are more GPIOs accessible. Somewhere there's SPI, too.
*Vcc : pin 2
*Rx : pin 3
*Tx : pin 4
*GND : pin 5 (long)
*GPIO4 : pin 6
*Vin : pin 8 (medium)
*GPIO0 : pin 17
*GPIO22 : pin 18
*Vin : pin 19 (medium)
*USB Data- : pin 20
*USB Data+ : pin 21
*GND : pin 22 (long)
How to connect to the serial port, see [[#RS232|above]]
===Power supply===
===Power supply===
You can use the TI-Nspire with an external power supply (5V to 6V) instead of the batteries. Use pad P1, pin 8 or pin 19 for V+ and pad P2, pin 5 or pin 22 for GND. It will boot, but print "Critical voltage detected. Forcing shutdown." on RS232 and shutdown. It seems that the battery voltage of measured using only 2 batteries. A workaround is to use two resistors (100K work) to set the middle point at half voltage.
You can use the TI-Nspire with an external power supply (5V to 6V) instead of the batteries. Use pad P1, pin 8 or pin 19 for V+ and pad P2, pin 5 or pin 22 for GND. It will boot, but print "Critical voltage detected. Forcing shutdown." on RS232 and shutdown. It seems that the battery voltage of measured using only 2 batteries. A workaround is to use two resistors (100K work) to set the middle point at half voltage.
==Screen==
==Screen==
240x320, 16 grayshades LCD screen.
{| class="wikitable"
 
! Device !! Screen !! Controller !! Notes
| TI-Nspire Clickpad/Touchpad || 320x240 - 4 bit greyscale LCD || [http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0161e/index.html ARM PrimeCell PL110] ||
| TI-Nspire CX (before rev W)|| 320x240 - 16 bit color LCD || [http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0293c/index.html ARM PrimeCell PL111] ||
| TI-Nspire CX (from rev W)|| 240x320 - 16 bit color LCD || Same as previous? || LCD is rotated
==CPU==
==CPU==
Code: ...
CPU is an [http://www.arm.com/products/CPUs/ARM926EJ-S.html ARM926EJ-S] with ARM9 instruction set ([http://infocenter.arm.com/help/topic/com.arm.doc.ddi0198e/index.html Reference manual]), 16KB of instruction cache, 8KB of data cache.  
 
{| class="wikitable"
Manufacturer: Texas Instruments
! Device !! Chip !! Technology !! Notes
 
| TI-Nspire Clickpad || Texas Instruments TI-NS2006A || Zevio LSI || [http://microblog.routed.net/2008/08/15/ic-friday-tis-nspire/ Die photos]
Model: TI-NSPIRE / L9A0702 / TI-NS2006A-0 / LSI LOGIC / ZEVIO / U 0714 / WYJ14052-1
| TI-Nspire Touchpad || Texas Instruments TI-NS2007C Magnum || Zevio LSI ||
 
| TI-Nspire COLOR || Texas Instruments ET-NS2010A || Toshiba ASIC ||
(Seems to be the same one in TI-nspire CAS, 0702 and 0714 might be datestamps)
| TI-Nspire CX || Texas Instruments ET-NS2010B || Toshiba ASIC ||
 
| TI-Nspire CM || Texas Instruments ET-LC2010B || Toshiba ASIC || Some research should be done to find differences with CX SOC
[http://www.unsads.com/~squalyl/nspire/specs/ZEVIO1020_PB.pdf LSI Zevio 1020 product brief]
 
CPU is an [http://www.arm.com/products/CPUs/ARM926EJ-S.html ARM926EJ-S] with ARM9 instruction set ([http://infocenter.arm.com/help/topic/com.arm.doc.ddi0198e/index.html Reference manual]), 16KB of instruction cache, 8KB of data cache. Commands of the link protocol report a frequency of 90 Mhz for both the TI-Nspire and the TI-Nspire CAS.
 
[http://microblog.routed.net/2008/08/15/ic-friday-tis-nspire/ Die photos] are now available, showing an in-house part number and dual CHIPIDEA cores.
 
''Any useful information at the [http://www.open-research.org.uk/ARMuC/ ARM microcontroller wiki] ?''
 
==SDRAM==
==SDRAM==
Code: ...
{| class="wikitable"
 
! Device !! Chip !! Size !! Notes
Manufacturer: QIMONDA
| TI-Nspire Clickpad || QIMONDA HYB18L256160 || 32MiB (16Mb x 16) ||
 
| TI-Nspire Touchpad || MT48H16M16 || 32MiB (16Mb x 16) ||
Model: HYB18L256160BF-7.5 WV22400
| TI-Nspire CX (before rev J) || Samsung K511F12ACA-B075 || 64MiB|| K511F12ACA is a multipart package, shared with NAND Flash-ROM
 
| TI-Nspire CX (from rev J) || ESMT FM60D1G12A 6BE || 64MiB || FM60D1G12A is a multipart package, shared with NAND Flash-ROM
Datasheet: [http://www.unsads.com/~squalyl/nspire/specs/HYx18L256160BxL-7.5_rev173.pdf Local mirror] - [http://www.qimonda.com/download.jsp?ref=/qis_docs/Datasheets/Datasheets%20Mobile/HYx18L256160BxL-7.5_rev173.pdf Manufacturer site]
| TI-Nspire CM || Samsung K511F5ACC-B075 || 32MiB || K511F5ACC is a multipart package, shared with NAND Flash-ROM
 
Some more research has to be done here, regarding what the SOC exactly contains + external in all revisions.
Function: 32MB SDRAM (16bit bus)
==NAND memory==
 
Used for Boot2, Diag, OS and user filesystem.
==Storage (?) memory==
{| class="wikitable"
Code: ...
! Device !! Chip !! Size !! Notes
 
| TI-Nspire Clickpad || ST NAND256R3A || 32MiB ||
Manufacturer: ST
| TI-Nspire Touchpad || Samsung SEC K9F5608 || 32MiB ||
 
| TI-Nspire CX (before rev J) || Samsung K511F12ACA-B075 || 128MiB || K511F12ACA is a multipart package, shared with SDRAM
Model: NAND 256 / R3A2BZA6 / GK 0JF 8Y / CHN 88 711
| TI-Nspire CX (from rev J) || ESMT FM60D1G12A 6BE || 128MiB || FM60D1G12A is a multipart package, shared with SDRAM
 
| TI-Nspire CM || Samsung K511F5ACC-B075 || 128MiB || K511F5ACC is a multipart package, shared with SDRAM
Function: 32MB FLASH NAND (block access) memory
Notes: The memory does not support "Execute In Place" (XIP). If executable code is contained in this memory, it has to be copied in RAM first.
 
==NOR ROM==
Notes: This memory does not support "Execute In Place" (XIP). If executable code is contained in this memory, it has to be copied in RAM first. Probably contains the Operating System, the documents and the invisible file system of the OS which needs to survive a [[Operating System#Booting and resetting|reboot]].
Used for boot1 and certificate memory.
 
{| class="wikitable"
==Boot1 and certificate memory==
! Device !! Chip !! Size !! Notes
Code: ...
| TI-Nspire Clickpad || SST 39WF400A || 512KB ||
 
| TI-Nspire Touchpad || Internal || ??KB ||
Manufacturer: Silicon Storage Technology
| TI-Nspire COLOR || Macronix MX29SL402 || 512KB || Prototype
 
| TI-Nspire CX || Internal || ??KB ||
Model: 39WF400A 90-4C-B3KE
| TI-Nspire CX rev W || Macronix MX29SL402 || 512KB || Probably added so that they could include a new boot1 that can handle the new board design / LCD
 
| TI-Nspire CM || Internal || ??KB ||
Datasheet: [http://www.unsads.com/~squalyl/nspire/specs/S71220.pdf Local Mirror] - [http://www.sst-ic.com/PDF/39WF400A.pdf Manufacturer site]
 
Function : 512KB NOR FLASH (16bit bus, memory mapped)
 
Notes: Probably contains the boot code which loads the Operating System kept in the storage memory. As on previous calculator models with flash memory, contains code to receive a new Operating System. This memory would be read-only, only the storage memory would be written to. Another possible scenario is that the whole kernel (Nucleus RTOS) is stored here, and that OS updates do not include it (a two memories flashing seems unlikely), but in this case the kernel couldn't be updated.
 
==Other==
==Other==
===Real-Time Clock===
===Real-Time Clock===
The clock is correctly emulated in the [[TI-84 Plus Emulation|TI-84 Plus mode]] of the TI-Nspire. Although the TI-Nspire OS doesn't display any clock as the TI-89 Titanium and the TI-84 Plus do, the TI-Nspire keeps track of time when the TI-84 Plus keypad is replaced by the TI-Nspire keypad, and then put back. We can be quite sure there is an [http://en.wikipedia.org/wiki/Real-time_clock RTC] inside. It is also interesting to mention the XML tags ''dfmt'' (date format) and ''tfmt'' (time format) set to 1 in the factory settings (''phoenix/syst/locales/en/settings/factory.zip/settings.xml'' of the [[OS_upgrade_files#Compressed_file_system|compressed file system]]) in the OS file of both the TI-Nspire and the TI-Nspire CAS. These two parameters don't appear in the system settings dialog of the TI-Nspire OS, as it is the case for the tags ''curr'' and ''unit'' of ''settings.xml''.
The clock is correctly emulated in the [[TI-84 Plus Emulation|TI-84 Plus mode]] of the TI-Nspire. Although the TI-Nspire OS doesn't display any clock as the TI-89 Titanium and the TI-84 Plus do, the TI-Nspire keeps track of time when the TI-84 Plus keypad is replaced by the TI-Nspire keypad, and then put back. We can be quite sure there is an [http:/<
 
/en.wikipedia.org/wiki/Real-time_clock RTC] inside. It is also interesting to mention the XML tags ''dfmt'' (date format) and ''tfmt'' (time format) set to 1 in the factory settings (''phoenix/syst/locales/en/settings/factory.zip/settings.xml'' of the [[OS_upgrade_files#Compressed_file_system|compressed file system]]) in the OS file of both the TI-Nspire and the TI-Nspire CAS. These two parameters don't appear in the system settings dialog of the TI-Nspire OS, as it is the case for the tags ''curr'' and ''unit'' of ''settings.xml''.
===MMU===
===MMU===
The [http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0198e/Babfdfbh.html ARM926EJ-S] integrated [http://en.wikipedia.org/wiki/Memory_management_unit Memory Management Unit] is enabled, but seems to only be used to map NOR, RAM and peripherals in memory space, and control the cache settings : [[Virtual Memory]].
The [http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0198e/Babfdfbh.html ARM926EJ-S] integrated [http://en.wikipedia.org/wiki/Memory_management_unit Memory Management Unit] is enabled, but seems to only be used to map NOR, RAM and peripherals in memory space, and control the cache settings : [[Virtual Memory]].
==More information==
==More information==
*The [http://www.datamath.org/Graphing/NSpire.htm TI-Nspire] and [http://www.datamath.org/Graphing/NSpire_CAS.htm TI-Nspire CAS] in Datamath Calculator Musueum
*The [http://www.datamath.org/Graphing/NSpire.htm TI-Nspire] and [http://www.datamath.org/Graphing/NSpire_CAS.htm TI-Nspire CAS] in Datamath Calculator Musueum

Revision as of 14:12, 21 June 2019

Hardware revisions

TI-Nspire (Clickpad) / Phoenix

Variant / HW Revision Factory Datestamps MB code (PCB ID) board # LCD board code board # KB board code board # Other board board # Source (URL) Comment. (Note: many datestamps come from forums and other compilations) PVT CAS+ PH1_PVT_LCDB 2430 http://i.imgur.com/4hVUkaa.jpg <none> / pre-A S 0407-0707 P2/P3 ASIC MB_MP 6440 P1R2/P3_LB_MP 2440 http://i.imgur.com/WGPf0LF.jpg Some hav

utf-8

Proud owner of a TI-83+, TI-84+SE, and TI-Nspire clickpad edition.
utf-8

e an 'A' suffix to the left serial part: https://i.imgur.com/77oy8JT.jpg , https://i.imgur.com/K0aqUuW.jpg ; Also reported here: https://tiplanet.org/forum/viewtopic.php?f=17&t=4995 || Ph3-EVT1_FPC_1413

A S 0707-0907? http://www.publicsurplus.com/sms/auction/view?auc=1171896 for the associated viewscreen. (0607A would be seen for CAS devices) A (other?) K 0509 http://i.ebayimg.com/images/g/j6kAAOSwgn5XEZ-a/s-l1600.jpg B S 1207? https://groups.google.com/forum/#!msg/tinspire/wwFr1zlFf0s/G2ePaXVXwOkJ C P 0108-0308? D P 0508 E P 0508-0708 F P 0708-0908? G P 0409-0809 H P 0609 I P 0809?-1209 N1/N3_LB_ http://i.imgur.com/RidWq1Z.jpg

TI-Nspire (Touchpad) / Phoenix (Nspire2.0)

Variant / HW Revision Factory Datestamps MB code (PCB ID) board # LCD board code board # KB board code board # Other board board # Source (URL) Comment. (Note: many datestamps come from forums and other compilations) PROTO CAS PCB TG2995C MB 4400 https://tiplanet.org/forum/viewtopic.php?t=14207 DVT CAS N1 MB NKB 4420 N1/N3 LB PCR2 FPC 2410 https://tiplanet.org/forum/viewtopic.php?t=10964 A P 0110-0310 PCB TG2995D MB 4430 TG2995 C LB 2410 http://datamath.org/Graphing/JPEG_NSpire_CAS_TP.htm What is https://i.imgur.com/04R7lYv.jpg ? B P 0310-0710 PCB TG2995D MB 4430 TG2995 C LB 2410 http://datamath.org/Graphing/JPEG_NSpire_TP_Y.htm Found on a school edition (yellow) C P 0710-1010 D P 0611-0711 https://i.imgur.com/znF0jP3.jpg shows a datestamp E P 0412 https://i.imgur.com/73G6iBH.jpg shows a datestamp

TI-Nspire CX / Firebird

Variant / HW Revision Factory Datestamps MB code (PCB ID) board # LCD board code board # KB board code board # Other board board # Source (URL) Comment. (Note: many datestamps come from forums and other compilations) Proto ("Nspire Color") 0810 Firebird Color MB 6412 none Firebird Color BTB EVT 2410 https://tiplanet.org/forum/gallery/image_page.php?image_id=1691 <none> / pre-A Firebird Color MB 6421 https://i.imgur.com/Y4yds6M.png A P 0211?-0411 Firebird Color MB 6422 Firebird (Noncas) Color KB EVT 4421 Firebird Color BTB EVT1.2 2412 https://tiplanet.org/forum/gallery/image_page.php?image_id=1229 B P 0411-0511 Firebird Color MB 6422 Firebird (Noncas) Color KB EVT 4421 Firebird Color BTB EVT1.2 2412 https://tiplanet.org/forum/gallery/image_page.php?image_id=2634 C P 0511-0811? Firebird Color MB 6422 Firebird (Noncas) Color KB EVT 4421 Firebird Color BTB EVT1.2 2412 https://tiplanet.org/forum/gallery/image_page.php?image_id=1227 D P 0911-0512 Firebird Color MB 6422 Firebird (Noncas) Color KB EVT 4421 Firebird Color BTB EVT1.2 2412 https://tiplanet.org/forum/gallery/image_page.php?image_id=2397 https://i.imgur.com/OtnD7S3.jpg shows a datestamp. https://i.imgur.com/XEqIPUf.jpg is a CX-C CAS. E P 0512-0612? https://i.imgur.com/O3hLcQT.jpg shows a datestamp F P 0712-0812? Firebird Color MB 6430 Firebird (Noncas) Color KB EVT 4421 Firebird Color BTB EVT1.2 2412 https://tiplanet.org/forum/gallery/image_page.php?image_id=2398 G P 1012? https://i.imgur.com/SNfyWQP.jpg shows a datestamp H P 1112-0213 https://i.imgur.com/yOmZY29.jpg shows a datestamp I P 0213 Mention of the datestamp: https://www.omnimaga.org/general-calculator-help/hardware-needed-to-downgrade-3-2-4/msg360687/#msg360687 J ("CR") P 0313-0513? NSC CR MB 4440 Firebird (non)cas Color KB DVT 4424 Firebird Color BTB EVT1.2 2412 https://tiplanet.org/forum/gallery/image_page.php?album_id=184&image_id=2878 incompatible with OS versions < 3.2.3 / Nlaunch + J04 connector removed K P 0613-0713? L P 1113?-1213 Datestamp from here: https://tiplanet.org/forum/viewtopic.php?p=170487#p170487 M P 1213-0114? Datestamp from here: https://tiplanet.org/forum/viewtopic.php?p=166933#p166933 N P 0314 NSC SM MB 4412 Firebird (non)cas Color KB DVT 4424 Firebird Color BTB EVT1.2 2412 https://tiplanet.org/forum/gallery/image_page.php?image_id=3697 O ("CR II") P 0414-0614 NSC SM MB 4412 NSC CELL (Non)CAS KB 4410 Firebird Color BTB 2440 https://tiplanet.org/forum/gallery/image_page.php?image_id=5469 Samsung rechargeable battery. (Ref calc for France: N3/TBL/1E2/K) P P 0614 NSC SM MB 4412 NSC CELL (Non)CAS KB 4410 Firebird Color BTB 2440 Q ? R P 0814? Datestamp from http://www.cncalc.org/thread-11903-1-1.html S P 0914-1014 https://i.imgur.com/zsYyaNC.jpg shows a datestamp T ("CR III") P 1014-1214? CX CRIII MB 4412 NSC CR OS (Non)CAS 4413 Firebird Color BTB 2440 https://tiplanet.org/forum/gallery/image_page.php?image_id=5472 incompatible with OS versions < 3.9.1 U P 0115? V P 0315-0815? CX CRIII MB 4412 NSC CR OS (Non)CAS 4413 Firebird Color BTB 2440 W ("CR IV") P 1115-0116 CX CR IV MB 4440 <none> <none> https://tiplanet.org/forum/gallery/image_page.php?album_id=184&image_id=6823 Now uses a unified motherboard, instead of 3 parts. New LCD + J04 connector back + incompatible versions < 4.0.1

TI-Nspire CM / Rabbit

Variant / HW Revision Factory Datestamps MB code (PCB ID) board # LCD board code board # KB board code board # Other board board # Source (URL) Comment. (Note: many datestamps come from forums and other compilations) Chinese Language EVT1 <none> RABBIT MB EVT 4410 RABBIT KB (NON ) CAS EVT 2416 https://tiplanet.org/forum/gallery/image_page.php?image_id=2658 CM-C EVT1 (103) RABBIT KB (NON) CAS EVT 2419 https://tiplanet.org/forum/gallery/image_page.php?album_id=193&image_id=2761 CM-C CAS DVT1 (240) RABBIT MB EVT 4415 RABBIT KB (NON) CAS EVT 4411 https://tiplanet.org/forum/gallery/image_page.php?album_id=1&image_id=6294 CM-C P 0911 RABBIT MB DVT 6420 RABBIT KB (NON) CAS EVT 4420 https://tiplanet.org/forum/gallery/image_page.php?album_id=119&image_id=1359 CM-C (CAS) No-rev -> A P 0412-0512 RABBIT MB DVT 6420 RABBIT KB (NON) CAS EVT 4411 https://tiplanet.org/forum/gallery/image_page.php?album_id=180&image_id=2596 https://i.imgur.com/J3cJBcI.jpg shows a 0512 datestamp

PCB

High resolution photos can be found in the above table.

Connector J04

As can be seen in the PCB photos, there are empty pads for a connector labelled "J04" (not on some CR models). Most likely this is for debugging using an interface such as JTAG. Analyzation of the signals on the pins provided the following information regarding signal types. "GND" means signal ground, it has the same potential as the whole ground plane on the PCBs. The minus pole of one battery is directly connected to it. "Vcc 3.3V" means the 3.3V power supply of the calculator. It seems to be present even if the calculator is off. "Floating" is a signal with an undefined voltage level, this state is very likely for inputs. "High" is a signal with almost 3.3V, but not a supply signal. These signals are probably inputs with pull-up resistors (they can be pulled-down with a large value resistor).

GND GND Vcc 3.3V Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off High Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off High Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off Floating 10 Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off GND 11 12 Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off GND 13 14 GND Floating 15 16 Floating Floating 17 18 GND Floating 19 20 Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off Floating 21 22 Square-wave: 112Hz, 99% duty-cycle, not present if the calc is off Floating 23 24 RS232 Output (115'200,8,n,1) Floating 25 26 RS232 Input GND 27 28 GND GND 29 30 GND

TODO: Double-check the results and find out, what these signals (Floating, High, Square-wave) really are. Maybe, there are common interfaces as JTAG, I2C or whatever.

Connector J01 - Dock connector

Pins currently known, probably there are more GPIOs accessible. Somewhere there's SPI, too.

Vcc pin 2 Rx pin 3 Tx pin 4 GND pin 5 (long) GPIO4 / USB Data+ with Navigator Cradle pin 6 USB Data- with Navigator Cradle pin 7 Vin pin 8 (medium) GPIO0 pin 17 GPIO22 pin 18 Vin pin 19 (medium) GND pin 22 (long)

UART

A serial adapter can be connected to the Tx/Rx/GND pins of the dock connector (pin 1 is the one at the left-hand side, TI-Nspire upside down, connector at the bottom). Warning: only use TTL voltage levels, never RS232 levels. The configuration of the terminal on the computer side should be:

Baud rate 115200 Data 8 bit Parity none Stop 1 bit Flow control none

While starting up, the calculator sends some logging information through the interface. A log (including deletion and reprogramming the OS) can be found here). Different types of files can be send with the X-Modem protocol, depending on the boot startup options chosen with the key combos. Windows HyperTerminal or TeraTerm strangely couldn't be used for the X-Modem transfer. lrzsz is a better alternative, which can be built on Windows with Cygwin. 

stty -F /dev/ttyS0 115200 -evenp -cstopb
cat < /dev/ttyS0
# Abort with Ctrl+C when the X-Modem transfer begins
# The `cat` is used to show the startup logs during reboot
./lsz -X boot2.img <> /dev/ttyS0 >&0; cat /dev/ttyS0

Power supply

You can use the TI-Nspire with an external power supply (5V to 6V) instead of the batteries. Use pad P1, pin 8 or pin 19 for V+ and pad P2, pin 5 or pin 22 for GND. It will boot, but print "Critical voltage detected. Forcing shutdown." on RS232 and shutdown. It seems that the battery voltage of measured using only 2 batteries. A workaround is to use two resistors (100K work) to set the middle point at half voltage.

Screen

Device Screen Controller Notes TI-Nspire Clickpad/Touchpad 320x240 - 4 bit greyscale LCD ARM PrimeCell PL110 TI-Nspire CX (before rev W) 320x240 - 16 bit color LCD ARM PrimeCell PL111 TI-Nspire CX (from rev W) 240x320 - 16 bit color LCD Same as previous? LCD is rotated

CPU

CPU is an ARM926EJ-S with ARM9 instruction set (Reference manual), 16KB of instruction cache, 8KB of data cache.

Device Chip Technology Notes TI-Nspire Clickpad Texas Instruments TI-NS2006A Zevio LSI Die photos TI-Nspire Touchpad Texas Instruments TI-NS2007C Magnum Zevio LSI TI-Nspire COLOR Texas Instruments ET-NS2010A Toshiba ASIC TI-Nspire CX Texas Instruments ET-NS2010B Toshiba ASIC TI-Nspire CM Texas Instruments ET-LC2010B Toshiba ASIC Some research should be done to find differences with CX SOC

SDRAM

Device Chip Size Notes TI-Nspire Clickpad QIMONDA HYB18L256160 32MiB (16Mb x 16) TI-Nspire Touchpad MT48H16M16 32MiB (16Mb x 16) TI-Nspire CX (before rev J) Samsung K511F12ACA-B075 64MiB K511F12ACA is a multipart package, shared with NAND Flash-ROM TI-Nspire CX (from rev J) ESMT FM60D1G12A 6BE 64MiB FM60D1G12A is a multipart package, shared with NAND Flash-ROM TI-Nspire CM Samsung K511F5ACC-B075 32MiB K511F5ACC is a multipart package, shared with NAND Flash-ROM

Some more research has to be done here, regarding what the SOC exactly contains + external in all revisions.

NAND memory

Used for Boot2, Diag, OS and user filesystem.

Device Chip Size Notes TI-Nspire Clickpad ST NAND256R3A 32MiB TI-Nspire Touchpad Samsung SEC K9F5608 32MiB TI-Nspire CX (before rev J) Samsung K511F12ACA-B075 128MiB K511F12ACA is a multipart package, shared with SDRAM TI-Nspire CX (from rev J) ESMT FM60D1G12A 6BE 128MiB FM60D1G12A is a multipart package, shared with SDRAM TI-Nspire CM Samsung K511F5ACC-B075 128MiB K511F5ACC is a multipart package, shared with SDRAM

Notes: The memory does not support "Execute In Place" (XIP). If executable code is contained in this memory, it has to be copied in RAM first.

NOR ROM

Used for boot1 and certificate memory.

Device Chip Size Notes TI-Nspire Clickpad SST 39WF400A 512KB TI-Nspire Touchpad Internal ??KB TI-Nspire COLOR Macronix MX29SL402 512KB Prototype TI-Nspire CX Internal ??KB TI-Nspire CX rev W Macronix MX29SL402 512KB Probably added so that they could include a new boot1 that can handle the new board design / LCD TI-Nspire CM Internal ??KB

Other

Real-Time Clock

The clock is correctly emulated in the TI-84 Plus mode of the TI-Nspire. Although the TI-Nspire OS doesn't display any clock as the TI-89 Titanium and the TI-84 Plus do, the TI-Nspire keeps track of time when the TI-84 Plus keypad is replaced by the TI-Nspire keypad, and then put back. We can be quite sure there is an [http:/< /en.wikipedia.org/wiki/Real-time_clock RTC] inside. It is also interesting to mention the XML tags dfmt (date format) and tfmt (time format) set to 1 in the factory settings (phoenix/syst/locales/en/settings/factory.zip/settings.xml of the compressed file system) in the OS file of both the TI-Nspire and the TI-Nspire CAS. These two parameters don't appear in the system settings dialog of the TI-Nspire OS, as it is the case for the tags curr and unit of settings.xml.

MMU

The ARM926EJ-S integrated Memory Management Unit is enabled, but seems to only be used to map NOR, RAM and peripherals in memory space, and control the cache settings : Virtual Memory.

More information
Retrieved from "https://hackspire.org//index.php?title=Hardware&oldid=1694"